LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (On Board Diagnostic (OBD) - Generic Scan Tool - 4.2L V8 5V - Art, Awn, BBD) >> ST-Generic Sean Tool >> On Board Diagnostic (OBD) >> Malfunction lamp for On Board Diagnostic (OBD)/Malfunction Indicator Lamp (MIL) -K83- in instrument cluster >> Malfunction messages >> Blinking:

Malfunction messages: Blinking:

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Audi A6, 2003 Audi S6, 2003 Audi A6, 2002 Audi S6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

There is a malfunction that causes damage to the catalytic converter in this driving condition (e.g. combustion misfire). In this case, vehicle must only be driven at reduced performance!

NOTE: Check DTC memory if there is a driveability problem or a customer complaint, but the Malfunction Indicator Lamp (MIL) -K83- is not lit. There may be DTCs stored that do not cause the exhaust MIL to light up immediately, but only after engine is started again and malfunction is recognized again.