Additional exhaust regulation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Audi A6, 2003 Audi S6, 2003 Audi A6, 2002 Audi S6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

DIAGNOSTIC TROUBLE CODE P1296

SAE-DTC	DTC text	Corrective action
P1296	Malfunction in cooling system	Check Engine Coolant Temperature (ECT) Sensor -G62-. See ENGINE COOLANT TEMPERATURE (ECT) SENSOR -G62-, CHECKING . Check coolant regulator (thermostat): See ENGINE COOLING - 4.2L V8 5V - ART, AWN, BBD .

DIAGNOSTIC TROUBLE CODE P1325-P1332

SAE-DTC	DTC text	Corrective action
P1325	Knock control, cyl. 1 Control limit reached	Check knock sensors. See CHECK KNOCK SENSORS .
P1326	Knock control, cyl. 2 Control limit reached
P1327	Knock control, cyl. 3 Control limit reached
P1328	Knock control, cyl. 4 Control limit reached
P1329	Knock control, cyl. 5 Control limit reached
P1330	Knock control, cyl. 6 Control limit reached
P1331	Knock control, cyl. 7 Control limit reached
P1332	Knock control, cyl. 8 Control limit reached

DIAGNOSTIC TROUBLE CODE P1335-P1347

SAE-DTC	DTC text	Corrective action
P1335	Engine torque monitoring 2 Control limit exceeded	Check throttle valve control module. See THROTTLE VALVE CONTROL MODULE -J338-, CHECKING .
P1337	Bank 1, Camshaft Position (CMP) sensor -G163- Short circuit to Ground (GND)	Check Camshaft Position (CMP) sensor. See CHECK CAMSHAFT POSITION (CMP) SENSOR .
P1338	Bank 1, Camshaft Position (CMP) sensor -G163- Open circuit/short circuit to B+
P1340	Camshaft Position (CMP) / crankshaft position sensor incorrect allocation
P1347	Bank 2, Camshaft Position (CMP) / crankshaft position sensor incorrect allocation