Time since service
This function is used to input the time in days since the last service.
Indicated on display
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display:
- Press buttons -4- and -1-.
- Press -Q- button to confirm input.
Indicated on display (example only): Time in days since last service is indicated (here for example 110 represents 110 days)
NOTE:
- Input of current specified value is only possible in units of one day, indication in display also changes in units of one day.
- Observe notes when replacing instrument cluster. See INPUT VALUES FOR REPLACING INSTRUMENT CLUSTER .
- It is only possible to input values via direct input using the keypad of the scan tool.
- Press --> button.
Indicated on display (example only):
- Input desired input value via scan tool keypad, fill initial positions with "0."
Example:
Desired input value: e.g. 200 days
Keypad input: 00200
Indicated on display (example only):
- Press -Q- button to confirm input.
Indicated on display (example only):
- Press -Q- button to confirm input.
Indicated on display (example only):
- Press -Q- button to confirm input.
Indicated on display (example only):
- End adaptation of time since service by pressing the --> button.