LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> A8 Quattro >> Repair and Diagnosis >> Electrical >> Gauges >> On Board Diagnostic (OBD) >> Instrument cluster, On Board Diagnostic (OBD) >> Adaptation (function 10) >> Resetting SRI after service

Resetting SRI after service

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (1 Of 9)
G02729227Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (2 Of 9)
G02729228Courtesy of AUDI OF AMERICA, INC.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (3 Of 9)
G02729229Courtesy of AUDI OF AMERICA, INC.
NOTE:
  • The Service Reminder Indicator (SRI) reminds the driver when service becomes necessary. Indicator is in center display.
  • Service reminder appears 1 month or 1200 miles before service limit is reached. At intervals of 100 miles. Example for display: After a total driving distance of 7000 miles, "SERVICE IN 1000 miles" is indicated.
  • The remaining distance to service can be checked via the menu in center display.
  • When a service event arrives, the text information appears in the center display for 5 seconds when ignition is switched on. It is shown after the note for automatic transmission and a target input for navigation (if applicable). Indicated: "SERVICE!."
  • The currently valid specifications can be found in the "Maintenance" Repair Manual.
  • Software version of instrument cluster. See ON BOARD DIAGNOSTIC (OBD) OF INSTRUMENT CLUSTER, INITIATING  .

Indicated on display (example only): Service event is indicated

Fig 4: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (4 Of 9)
G02729230Courtesy of AUDI OF AMERICA, INC.

1 - means service is active, e.g. "SERVICE!" is being displayed in the instrument cluster.

NOTE: Only reset SRI via direct input.

Indicated on display:

Fig 5: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (5 Of 9)
G02729231Courtesy of AUDI OF AMERICA, INC.

Service event is reset via the following adaptation values:

SERVICE EVENT RESET ADAPTATION VALUES

Adaptation value  Service event 
00000 Reset

Indicated on display (example only):

Fig 6: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (6 Of 9)
G02729232Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 7: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (7 Of 9)
G02729233Courtesy of AUDI OF AMERICA, INC.

0 - means service is reset, e.g. after confirming with the -Q- button, "SERVICE IN 8000 miles" is displayed in the instrument cluster.

Indicated on display (example only):

Fig 8: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (8 Of 9)
G02729234Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 9: V.A.G 1551 Scan Tool Display - Resetting SRI After Service (9 Of 9)
G02729235Courtesy of AUDI OF AMERICA, INC.
scientia non olet · About LEMON Manuals