Odometer display

This function is used to adapt the odometer after the instrument cluster is replaced.

NOTE:

Adaptation can only be performed on an instrument cluster with an odometer reading of not more than 62 miles.
Adaptation can only be performed once for each instrument cluster.
Only higher adaptation values can be entered (more than 62 miles).
If an incorrect value is entered and confirmed, it is not possible to change it. If this happens, the instrument cluster must be replaced.
In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
Observe notes when replacing instrument cluster. See INPUT VALUES FOR REPLACING INSTRUMENT CLUSTER .

Indicated on display:

Fig 1: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (1 Of 13)

G02729261

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -1- to select "Login-Procedure" function 11.

Indicated on display:

Fig 2: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (2 Of 13)

G02729262

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (3 Of 13)

G02729263

Courtesy of AUDI OF AMERICA, INC.

Input code number 13861.

Indicated on display:

Fig 4: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (4 Of 13)

G02729264

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 5: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (5 Of 13)

G02729265

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -0-.

Indicated on display:

Fig 6: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (6 Of 13)

G02729266

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 7: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (7 Of 13)

G02729267

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -9-.
Press -Q- button to confirm input.

Indicated on display (example only):

Fig 8: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (8 Of 13)

G02729268

Courtesy of AUDI OF AMERICA, INC.

NOTE: For the VAG 1551, it is only possible to input values via direct input.

Press the --> button to continue program sequence.

Indicated on display (example only):

Fig 9: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (9 Of 13)

G02729269

Courtesy of AUDI OF AMERICA, INC.

Input adaptation value via keypad.

Example:

Mileage = 89627

0 8 9 6 3

Fig 10: Odometer Mileage Chart

G02729270

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 11: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (10 Of 13)

G02729271

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display (example only):

Fig 12: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (11 Of 13)

G02729272

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display (example only):

Fig 13: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (12 Of 13)

G02729273

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display (example only):

Fig 14: V.A.G 1551 Scan Tool Display - Odometer Display Adapting (13 Of 13)

G02729274

Courtesy of AUDI OF AMERICA, INC.

End adaptation of odometer by pressing the --> button.