Distance driven since service
This function is used to input the distance in miles since the last service.
Indicated on display
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display:
- Press buttons -4- and -0-.
- Press -Q- button to confirm input.
Indicated on display (example only): Distance in miles since last service is indicated (here for example 8 represents 800 miles)
NOTE:
- Input of current specified value is only possible in units of 100 miles, indication in display also changes in 100 mile units.
- Observe notes when replacing instrument cluster. See INPUT VALUES FOR REPLACING INSTRUMENT CLUSTER .
- In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
- It is only possible to input values via direct input using the keypad of the scan tool.
- Press --> button.
Indicated on display (example only):
- Input desired input value via scan tool keypad, fill initial positions with "0."
Example:
Desired input value: e.g. 1000 miles
Keypad input: 00010
Indicated on display (example only):
- Press -Q- button to confirm input.
Indicated on display (example only):
- Press -Q- button to confirm input.
Indicated on display (example only):
- Press -Q- button to confirm input.
Indicated on display (example only):
- End adaptation of distance driven since service by pressing the --> button.