LEMON Manuals
: Even more car manuals for everyone
Home
>>
Audi
>>
2003
>>
A8 Quattro
>>
Repair and Diagnosis
>>
Body & Frame
>>
Exterior Body Panels
>>
Bumper
>>
Rear bumper (m.y. 1999 and up)
>>
Rear bumper, installing
>>
Guide, removing and installing
Guide, removing and installing
Remove hex bolt -1- and take off guide -2-.
When installing, tighten hex bolts to 10 Nm.
Fig 1: Removing/Installing Guide (M.Y. 1999 & Up)
Courtesy of AUDI OF AMERICA, INC.
Courtesy of AUDI OF AMERICA, INC.