Front trim, removing

Remove Phillips-head screw -4-. See Fig 1.
Press retaining clamp -3- together lightly using pliers and slide trim out of bumper cover -2-.
Remove Phillips-head screw -3-.

Fig 1: Removing Phillips-Head Screw, Pressing Retaining Clamp Together & Sliding Trim Out Of Bumper Cover (M.Y. 1999 & Up)

Courtesy of AUDI OF AMERICA, INC.

Press locking lugs of retaining clamp -3- together lightly using pliers and slide trim out of bumper cover -2-. See Fig 2.
Disengage retaining clamp -1- to get and slide trim completely out of bumper cover.

Fig 2: Sliding Trim Out Of Bumper Cover (M.Y. 1999 & Up)

Courtesy of AUDI OF AMERICA, INC.