Long wave reception, enable/disable (where applicable)
Indicated on display
- Press buttons -8- and -8- to select adaptation "channel 88".
NOTE:
False entries can be corrected by pressing the "C" button.
- Press -Q- button to confirm input.
Indicated on display (example only):
Top row of display indicates adaptation channel selected and system adaptation value (configuration) currently stored.
- 0 = Long wave reception enabled
- 1 = Long wave reception disabled
- Press --> button.
Indicated on display (example only):
- Enter desired adaptation value (e.g.: 00001 or 00000)
- 00000 = enables long wave reception
- 00001 = disables long wave reception
- Press -Q- button to confirm input.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press --> button.
Indicated on display
- Press buttons -0- and -6- to select "End Output" function 06.
- Press --> button.