Adaptation, initiating

Indicated on display

Fig 1: Identifying Scan Tool Display - Adaptation (Navigation System IV) (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -0- to select "Adaptation", function 10.

Indicated on display:

Fig 2: Identifying Scan Tool Display - Adaptation (Navigation System IV) (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: Identifying Scan Tool Display - Adaptation (Navigation System IV) (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Enter desired adaptation channel (adaptation table. See ADAPTATION FUNCTIONS - NAVIGATION SYSTEM IV ).
Press -Q- button to confirm input.

NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.

ADAPTATION FUNCTIONS - NAVIGATION SYSTEM IV

Adaptation channel	Adaptation function
01	Adapt tire circumference in mm. See TIRE CIRCUMFERENCE, ADAPTING
02	Check pulse number per wheel rotation (GALA). See IMPULSE NUMBER/WHEEL ROTATION (GALA), CHECKING
03	Enable/disable production diagnostic (function status register). See PRODUCTION DIAGNOSTIC FUNCTION (FUNCTION STATUS REGISTER), ENABLING/DISABLING
04	Adapt connection of own/external speakers. See SPEAKER CONNECTION, ADAPTING
05	Adapt country selection. See COUNTRY SELECTION, ADAPTING
06	Adapt dynamic route guidance (where applicable). See DYNAMIC ROUTE GUIDANCE (WHERE APPLICABLE), ADAPTING