Tire circumference, adapting

Indicated on display

Fig 1: Identifying Scan Tool Display - Adaptation, Tire Circumference (Navigation System III) (1 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -1- to select adaptation channel 01.
NOTE: A false entry can be corrected by pressing button -C-.
Press -Q- button to confirm input.

Indicated on display (example only):

Fig 2: Identifying Scan Tool Display - Adaptation, Tire Circumference (Navigation System III) (2 Of 7)

Courtesy of AUDI OF AMERICA, INC.

The selected channel and the currently stored tire circumference in mm will be displayed in the line listed above.

Indicated on display (example only):

Fig 3: Identifying Scan Tool Display - Adaptation, Tire Circumference (Navigation System III) (3 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Enter new tire circumference, fill initial space with a zero to input the four digit value (for example, 01910) Tire table. See AUDI A8 TIRE SPECIFICATIONS .
Press -Q- button to confirm input.

Indicated on display

Fig 4: Identifying Scan Tool Display - Adaptation, Tire Circumference (Navigation System III) (4 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 5: Identifying Scan Tool Display - Adaptation, Tire Circumference (Navigation System III) (5 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 6: Identifying Scan Tool Display - Adaptation, Tire Circumference (Navigation System III) (6 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 7: Identifying Scan Tool Display - Adaptation, Tire Circumference (Navigation System III) (7 Of 7)

Courtesy of AUDI OF AMERICA, INC.