LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> A8 Quattro >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Front Pads (FN3) >> Removal (FN3)

Removal (FN3)

  1. Raise and support vehicle. Remove front wheels.
  2. Remove guide pin protective caps. See Figure . Pry brake pad retaining spring out from brake caliper housing with a screwdriver and remove. Disconnect brake pad wear indicator harness connector (if equipped).
  3. Remove both guide pins from brake caliper. Remove brake caliper housing and secure with wire so that the weight of the brake caliper does not stress or damage brake hose. Remove brake pads from brake caliper housing.
scientia non olet · About LEMON Manuals