Center armrest, modifications for retrofit
NOTE:
The following list refers to Fig 1.
- Cutout for retrofit center armrest
- Position cutouts per following dimensions:
- -a- = 245 mm
- -b- = 25 mm
- -c- = 83 mm
- Slots for parcel shelf trim assembly
- Position slots per the following dimensions:
- -d- = 6 mm
- -e- = 30 mm
- -f- = 14 mm
- -g- = 4 mm
- -h- = 6 mm
- Close-out panel
- For center armrest without telephone installation
- Close-out panel
- For telephone installation with cable routing
- Center console
- Parcel shelf