Center console and center armrest with telephone, installation
NOTE:
The following list refers to Fig 1.
- Mounting plate, short
- For installation in storage shelf center console
- Mounting plate, long
- For installation in the storage shelf center console
- Receiver mounting
- Only for LU-telephone from AEG
- Phillips-head screw
- 0.8 Nm (7 in.lb.)
- 2 parts
- Phillips-head screw
- 1.1 Nm (9 in.lb.)
- Phillips-head screw
- 0.8 Nm (7 in.lb.)
- 2 parts
- Telephone
- Close-out panel
- With cable routing
- Trim for center console
- Grommet
- Bracket for center armrest
- Spring bracket
- Hex socket bolt
- 22 Nm (16 ft.lb.)
- Cover
- On spring bracket -12-
- Center armrest
- 2 parts