Center armrest with Cullmann-Lift, removing and installing
- Removing
- Remove left- and right-side trim pieces from center armrest. See CENTER ARMREST TRIM PLATE, REMOVING AND INSTALLING .
- Remove storage compartment. See CENTER ARMREST STORAGE COMPARTMENT, REMOVING AND INSTALLING .
- Metal rail
- Pull metal rail -1- up and remove to side.
- Pull spring mounting -2- off in downward direction.
- Remove screws -3- (6x).
- Spring mounting
- Screws (6x)
- Installing
Install in reverse order of removal
NOTE:
The spring mounting must be installed on the opposite side from the support bracket.