On Board Diagnostic (OBD) - Central Locking System & Ultrasonic Interior Monitoring

• V.A.G 1551 scan tool, connecting
• Central locking system On Board Diagnostic (OBD) from 07.96
  • General information
  • Central Locking System On Board Diagnostic (OBD), initiating
    • Conditions:
    • Control module identification (example)
      • Notes
      • Available functions
  • Check DTC Memory (function 02)
  • Erase DTC Memory (function 05)
  • End output (function 06)
  • Diagnostic Trouble Code (DTC) table
  • Output Diagnostic Test Mode (function 03)
    • Notes
    • Output Diagnostic Test Mode (function 03)
  • Code Control Module (function 07) for central locking
    • Notes
    • Coding table for vehicles up to 06.97:
    • Coding table for vehicles from 07.97:
  • Read Measuring Value Block (function 08)
    • Notes
    • Display Group 001
    • Display Group 002
    • Display Group 003
    • Display group 004, vehicles up to 03.97
    • Display group 004, vehicles from 03.97
  • Vehicle key for radio remote control, programming/erasing
    • Notes
    • Work step of adapting new radio-controlled keys
    • Work procedure for re-adapting existing radio-controlled keys
    • Work sequence for erasing memory positions
• Ultrasonic interior monitoring system, through 06.97, servicing
  • General information
  • Function
  • Interior monitoring system, functional test
  • Interior monitoring system diagnostic
  • Diagnostic table
  • Corrective action
    • Notes
    • Sensor Check
    • Replace control module
    • Check wiring
  • Ultrasonic sensors for interior monitoring system, removing and installing
    • Removing
    • Installing
  • Control module for interior monitoring system, removing and installing
    • Removing
    • Installing
  • Assignment of connector at control module
  • Assignment of connector at sensor
  • Momentary contact deactivation switch, checking
• Ultrasonic interior monitoring system, from 07.97 on
  • General information
  • Function
  • On Board Diagnostic (OBD) of interior monitoring system, initiating
    • Notes
    • Equipment version without side curtain airbag system
    • Equipment version with side curtain airbag system
    • Control module identification (example)
  • Available functions
  • Check DTC Memory (function 02)
  • Erase DTC Memory (function 05)
  • End output (function 06)
  • Diagnostic Trouble Code (DTC) table
  • Output Diagnostic Test Mode (DTM) (function 03) (vehicles without side curtain airbag)
    • Notes
    • Checking power supply lead
      • Special tools, testers and auxiliary items required
      • Test sequence
    • Checking clock signal lead
      • Special tools, testers and auxiliary items required
      • Test sequence
  • Output Diagnostic Test Mode (DTM) (function 03) (vehicles with side curtain airbag)
  • Code Control Module (function 07) (vehicles without side curtain airbag)
  • Code Control Module (function 07) (vehicles with side curtain airbag)
  • Read Measuring Value Block (function 08)
    • Notes
    • Display Group 001 (equipment version without side curtain airbag system)
    • Display Group 001 (equipment version with side curtain airbag system)
  • Adaptation (function 10)