On Board Diagnostic (OBD) of tire pressure control system: Adaptation

The antenna diagnosis can be activated with the "Adaptation" function.

TIRE PRESSURE MONITOR ADAPTATION FUNCTION

Adaptation channel	Adaptation function
17	Antenna diagnosis
	0 - on
	1 - off

Performing Adaptation (function 10)

Indicated on display:

Fig 1: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Select Function)

G02727558

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -0- (10 selects function: "Adaptation").

Indicated on display:

Fig 2: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (10 Adaption

G02727559

Courtesy of AUDI OF AMERICA, INC.

Confirm entry with -Q- button.

Indicated on display:

Fig 3: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Feed In Channel Number)

G02727560

Courtesy of AUDI OF AMERICA, INC.

Enter the required Adaptation channel 17.
Confirm entry with -Q- button.

Indicated on display:

Fig 4: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (System Test Off)

G02727561

Courtesy of AUDI OF AMERICA, INC.

Press --> button.

Indicated on display:

Fig 5: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Enter Adaption Value)

G02727562

Courtesy of AUDI OF AMERICA, INC.

Entry via buttonpad: 0001

Indicated on display:

Fig 6: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Adaption Value 00001)

G02727563

Courtesy of AUDI OF AMERICA, INC.

Confirm entry with -Q- button.

Indicated on display:

Fig 7: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Store Changed Value)

G02727564

Courtesy of AUDI OF AMERICA, INC.

Confirm entry with -Q- button.

Indicated on display:

Fig 8: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Changed Value Stored)

G02727565

Courtesy of AUDI OF AMERICA, INC.

Press --> button.

Channel 17 should now display:

Indicated on display:

Fig 9: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (System Test On)

G02727566

Courtesy of AUDI OF AMERICA, INC.

Press --> button.

Measured value block 021 should now display:

Indicated on display:

Fig 10: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Wait)

G02727567

Courtesy of AUDI OF AMERICA, INC.

If the antenna diagnosis is completed:

Indicated on display:

Fig 11: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Measurement End)

G02727568

Courtesy of AUDI OF AMERICA, INC.

Press --> button.
Read out the DTC memory, see CHECK DTC MEMORY .
Press buttons -0- and -6- (06 selects the function "End output").

Indicated on display:

Fig 12: VAG Scan Tool Display - Adaption, Tire Pressure Monitoring (Select Function)

G02727569

Courtesy of AUDI OF AMERICA, INC.