Gas discharge (xenon) headlights with automatic headlight beam adjustment, general overview
NOTE:
The following list refers to Fig 1.
- Headlight lens with integrated turn signal housing
- Turn signal bulb/parking light
- 12 V, 21/5 W orange
- Changing bulb. See REPLACING TURN SIGNAL BULB/PARKING LIGHT .
- Bulb holder, turn signal/parking light
- Reflector for low beam, high beam and standing light
- Gas discharge bulb
- 12 V, 35 W
- Changing bulb. See REPLACING LOW BEAM BULB (GAS DISCHARGE HEADLIGHT) .
- Securing ring (bayonet connection) for gas discharge lamp
- Bulb for high beam
- H1 - 12 V, 55 W
- Changing bulb. See REPLACING BULB FOR HIGH BEAM .
- Headlight housing with enclosure seal for headlight lens
- Housing lid, large
- Housing lid, small
- Igniter for gas discharge lamps -N195-
- Removing and installing. See IGNITER FOR GAS DISCHARGE LAMPS -N195-, REMOVING AND INSTALLATION .
- Actuating motor for vertical aim adjustment (step motor)
- Removing and installing. See ADJUSTING MOTOR FOR AUTOMATIC VERTICAL AIM CONTROL, HIGH INTENSITY GAS DISCHARGE (XENON) HEADLIGHT, REMOVING AND INSTALLING .
- Mounting bolts for headlight aim adjusting motor
- Mounting bolts for igniter for gas discharge lamps -N195-
- Retaining clamps for headlight lens (6 x)