LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> A8 Quattro >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> On Board Diagnostic (OBD) >> Instrument cluster, On Board Diagnostic (OBD) >> Erase DTC Memory (function 05) >> Requirements

Erase DTC Memory (function 05): Requirements

After successful DTC memory check:

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Erase DTC Memory - Function 02 (1 Of 6)
G02729190Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Erase DTC Memory - Function 02 (2 Of 6)
G02729191Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 3: V.A.G 1551 Scan Tool Display - Erase DTC Memory - Function 02 (3 Of 6)
G02729192Courtesy of AUDI OF AMERICA, INC.

DTC memory is erased.

Indicated on display

Fig 4: V.A.G 1551 Scan Tool Display - Erase DTC Memory - Function 02 (4 Of 6)
G02729193Courtesy of AUDI OF AMERICA, INC.
NOTE:
  • Test sequence is faulty if this message is displayed.
    • Fig 5: V.A.G 1551 Scan Tool Display - Erase DTC Memory - Function 02 (5 Of 6)
    G02729194Courtesy of AUDI OF AMERICA, INC.
  • Test sequence is faulty if this message is displayed.
    • Fig 6: V.A.G 1551 Scan Tool Display - Erase DTC Memory - Function 02 (6 Of 6)
    G02729195Courtesy of AUDI OF AMERICA, INC.

Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.

scientia non olet · About LEMON Manuals