Initiating "Adaptation" function 10

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Initiating Adaptation, Instrument Cluster (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -0- to select "Adaptation" function 10.
Press -Q- button to confirm input.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Initiating Adaptation, Instrument Cluster (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Initiating Adaptation, Instrument Cluster (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Enter desired adaptation channel. See ADAPTATION TABLE .
Press -Q- button to confirm input.

NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.