Check DTC Memory (function 02)

NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Checking DTC Memory (1 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Checking DTC Memory (2 Of 5)

Courtesy of AUDI OF AMERICA, INC.

The number of stored malfunctions appears in the display.

Fig 3: V.A.G 1551 Scan Tool Display - Checking DTC Memory (3 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Check print-out against DTC table and repair all malfunctions as necessary. See Diagnostic Trouble Code (DTC) table .

If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the --> button is pressed.

Fig 4: V.A.G 1551 Scan Tool Display - Checking DTC Memory (4 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 5: V.A.G 1551 Scan Tool Display - Checking DTC Memory (5 Of 5)

Courtesy of AUDI OF AMERICA, INC.

If something else is displayed:

See Operating instructions of Scan Tool (ST).