Output DTM, initiating:
- Press buttons -0- and -3- to select "Output Diagnostic Test Mode (DTM)", function 03.
NOTE:
Some OBD program text/data generated by control modules may not be recognized by VAG 1551/1552 scan tools with the latest program card. For example: scan tool display shows "text 799", "01529 /references" or similar. In these cases, use VAS 5051 tester instead.
Indicated on display:
- Press -Q- button to confirm input.
Indicated on display momentarily, then
Indicated on display:
- An intermittent tone emits from the loudspeaker.
- Press --> button.
Indicated on display:
- An intermittent tone emits from the emergency (back-up) loudspeaker.
- Press --> button.
Indicated on display:
- System status LED in center of OnStar(R) button module blinks green.
- Press --> button.
Indicated on display:
- System status LED in center of OnStar (R) button module blinks red.
- Press --> button.
Indicated on display:
- Vehicles doors are locked.
- Press --> button.
Indicated on display:
- Vehicle doors are unlocked.
- Press --> button.
Indicated on display:
- Emergency flashers are activated.
- Press --> button.
Indicated on display:
- Horn is activated.
- Press --> button.
Indicated on display
- Press --> button.
- The tester returns to "Select function" mode.
Indicated on display