Transport Mode, activating/deactivating
Indicated on display:
Fig 1: Identifying Scan Tool Display - Transport Mode, Activating/Deactivating (Telematics) (1 Of 3)
- Press buttons -0- and -3- to select adaptation channel 03.
NOTE:
False entries can be corrected by pressing the "C" button.
- Press -Q- button to confirm input.
Indicated on display (example only):
Fig 2: Identifying Scan Tool Display - Transport Mode, Activating/Deactivating (Telematics) (2 Of 3)
Top row of display indicates adaptation channel selected and current adaptation value currently stored.
0 = Transport Mode deactivated
1 = Transport Mode activated
Bottom row confirms Transport Mode status.
- Press --> button.
Indicated on display (example only):
Fig 3: Identifying Scan Tool Display - Transport Mode, Activating/Deactivating (Telematics) (3 Of 3)
- Enter desired adaptation value (example follows):