Speaker connection, adapting

Indicated on display

Fig 1: Identifying Scan Tool Display - Speaker Connection, Adapting (Navigation System IV) (1 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -4- to select adaptation channel 04.

NOTE: A false entry can be corrected by pressing button -C-.

Press -Q- button to confirm input.

Indicated on display (example only)

Fig 2: Identifying Scan Tool Display - Speaker Connection, Adapting (Navigation System IV) (2 Of 7)

Courtesy of AUDI OF AMERICA, INC.

The selected channel and status/type of speaker connection is displayed in the upper line (0 = external radio, 1 = own speaker). If a radio system is installed, front left speakers are used, otherwise a separate speaker (hands-free speaker) is installed.

Press --> button.

Indicated on display (example only)

Fig 3: Identifying Scan Tool Display - Speaker Connection, Adapting (Navigation System IV) (3 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Enter new adaptation value (for example, 00001), where 00000 = external radio and 00001 = separate speaker.
Press -Q- button to confirm input.

Indicated on display

Fig 4: Identifying Scan Tool Display - Speaker Connection, Adapting (Navigation System IV) (4 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display

Fig 5: Identifying Scan Tool Display - Speaker Connection, Adapting (Navigation System IV) (5 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display

Fig 6: Identifying Scan Tool Display - Speaker Connection, Adapting (Navigation System IV) (6 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press --> button.

Indicated on display

Fig 7: Identifying Scan Tool Display - Speaker Connection, Adapting (Navigation System IV) (7 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -6- to select "End Output", function 06.
Press --> button.