Dynamic route guidance (where applicable), adapting
The navigation control module -J401- must be adapted to activate/deactivate dynamic route guidance functions and from what channel the information is taken (radio with RDS - TMC and/or telephone where applicable)
Indicated on display
Fig 1: Identifying Scan Tool Display - Dynamic Route Guidance (Where Applicable) (Navigation System IV) (1 Of 7)
- Press buttons -0- and -6- to select adaptation channel 6.
NOTE:
A false entry can be corrected by pressing button -C-.
- Press -Q- button to confirm input.
Indicated on display (example only)
Fig 2: Identifying Scan Tool Display - Dynamic Route Guidance (Where Applicable) (Navigation System IV) (2 Of 7)
The selected channel and system configuration is displayed in the upper line.
System configuration, interpreting:
0 = without dynamic route guidance
1 = with dynamic route guidance and RDS-Radio with TMC
2 = with dynamic route guidance and RDS-Radio with TMC and Telephone
- Press --> button
Indicated on display (example only)
Fig 3: Identifying Scan Tool Display - Dynamic Route Guidance (Where Applicable) (Navigation System IV) (3 Of 7)
- Enter new adaptation value (for example, 00001), where 00001 = with dynamic route guidance and RDS-Radio with TMC.
- Press -Q- button to confirm input.
Indicated on display
Fig 4: Identifying Scan Tool Display - Dynamic Route Guidance (Where Applicable) (Navigation System IV) (4 Of 7)
- Press -Q- button to confirm input.
Indicated on display
Fig 5: Identifying Scan Tool Display - Dynamic Route Guidance (Where Applicable) (Navigation System IV) (5 Of 7)
- Press -Q- button to confirm input.
Indicated on display
Fig 6: Identifying Scan Tool Display - Dynamic Route Guidance (Where Applicable) (Navigation System IV) (6 Of 7)
- Press --> button.
Indicated on display
Fig 7: Identifying Scan Tool Display - Dynamic Route Guidance (Where Applicable) (Navigation System IV) (7 Of 7)
- Press buttons -0- and -6- to select "End Output", function 06.
- Press --> button.