On Board Diagnostic (OBD) functions

The following functions are possible:

01- Check Control Module Versions. See CONTROL MODULE VERSIONS, CHECKING (FUNCTION 01)  .

02 - Check DTC Memory. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING (FUNCTION 02)  .

03 - Output Diagnostic Test Mode. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, ERASING (FUNCTION 05) 

05 - Erase DTC Memory. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, ERASING (FUNCTION 05)  .

06 - End Output. See END OUTPUT (FUNCTION 06)  .

08 - Read Measuring Value Block. See READ MEASURING VALUE BLOCK (FUNCTION 08)  .

10 - Adaptation. See ADAPTATION (FUNCTION 10)  .