On Board Diagnostic (OBD) functions

The following functions are possible:

02 - Check DTC Memory. See CHECK DTC MEMORY (FUNCTION 02)  .

03 - Output Diagnostic Test Mode. See OUTPUT DIAGNOSTIC TEST MODE (DTM) (FUNCTION 03)  .

05 - Erase DTC Memory. See ERASE DTC MEMORY (FUNCTION 05)  .

06 - End Output. See END OUTPUT (FUNCTION 06)  .

07 - Code Control Module. See CODE CONTROL MODULE (FUNCTION 07)  .

08 - Read Measuring Value Block. See READ MEASURING VALUE BLOCK (FUNCTION 07)  .

10 - Adaptation. See ADAPTATION (FUNCTION 10)  .