On Board Diagnostic (OBD) functions

The following functions are possible:

1. 01 - Check control module version. See CHECK CONTROL MODULE VERSIONS (FUNCTION 01)  .
2. 02 - Check DTC Memory. See CHECK DTC MEMORY (FUNCTION 02)  .
3. 03 - Output Diagnostic Test Mode. See OUTPUT DIAGNOSTIC TEST MODE (FUNCTION 03)  .
4. 04 - Basic Setting. See BASIC SETTING (FUNCTION 04)  .
5. 05 - Erase DTC Memory. See ERASE DTC MEMORY (FUNCTION 05)  .
6. 06 - End Output. See END OUTPUT (FUNCTION 06)  .
7. 07 - Code Control Module. See CODE CONTROL MODULE (FUNCTION 07)  .
8. 08 - Read Measuring Value Block. See READ MEASURING VALUE BLOCK (FUNCTION 08)  .