Test requirements

Check fuse for function according to wiring diagram.
Connect VAS 5051 tester or VAG 1551 scan tool. See VAS 5051 TESTER OR VAG 1551 SCAN TOOL, CONNECTING AND SELECTING FUNCTIONS .

NOTE:

If nothing is indicated on display, check voltage supply for VAG 1551 scan tool according to wiring diagram.
Additional instructions can be called up via the HELP button on the scan tool.
The --> button is used for advancing through the program sequence.
An incorrect entry can be canceled using the -C- button.
Function 00 "Automatic test sequence" can be performed in operating mode 1 "Rapid data transfer." This automatically checks all control modules installed in the vehicle.

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Initiating Acoustic Parking System OBD (1 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Address word for Acoustic Parking System: 76

Indicated on display:

Fig 2: V.A.G 1551 Scan Tool Display - Initiating Acoustic Parking System OBD (2 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only): after approx. 5 seconds:

Fig 3: V.A.G 1551 Scan Tool Display - Initiating Acoustic Parking System OBD (3 Of 5)

Courtesy of AUDI OF AMERICA, INC.

4D0919283: Part number of control module for parking aid (see also parts catalog)
D03: Software version of control module for parking aid
Coding 1108: Coding of control module for parking aid
WSC 06812: dealership number

If one of these messages is displayed, perform trouble shooting according to troubleshooting diagnostic.

Fig 4: V.A.G 1551 Scan Tool Display - Initiating Acoustic Parking System OBD (4 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 5: V.A.G 1551 Scan Tool Display - Initiating Acoustic Parking System OBD (5 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Pressing the HELP button will print out an overview of all of the possible functions.
Press the --> button to continue program sequence.