Door handle, removing: Notes
NOTE:
The following list refers to Fig 1
.
- Mount for door handle
- The lock cylinder is part of the mount and cannot be individually replaced
- Locating pin
- When installing, be sure securing spring reaches completely around hinge arm
- Hinge arm
- Door handle
- Before removing, remove door trim and door component carrier
- To remove, remove locating pin -2- and flip up hinge arm -3-.
- Disengage slide at mount for door handle -1- using a screwdriver. See DISENGAGING MOUNT FOR DOOR HANDLE .
- Remove mount for door handle and lock cylinder together with door handle.