Adaptation channel 61-Adaptation for comfort system CAN-bus

Display on VAS 5051:

Fig 1: Display On VAS 5051 - Adaptation Channel 61, Adaptation For Comfort System CAN-Bus (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Select function "61" in button field -2- for "Adaptation channel 61" and press Q button to confirm input.

Display on VAS 5051:

Fig 2: Display On VAS 5051 - Adaptation Channel 61, Adaptation For Comfort System CAN-Bus (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Channel 61 read and test
No indication
Keypad - only direct input via the keypad is possible
The sliding bar is positioned on the current adaptation value

NOTE:

The adaptation values of the table must be entered. See ADAPTATION VALUE .
When replacing instrument cluster, observe. See Input values for replacing instrument cluster .

Installed control modules (addition of corresponding adaptation values) that participate in the A6 Comfort system CAN-bus are added (See measuring value block. See Measuring value block 130 ).

NOTE: The instrument cluster, which supports CAN, is not indicated in the measuring value block, but must be added anyway.

ADAPTATION VALUES - COMFORT SYSTEM CAN-BUS

Equipment	Adaptation value
Instrument cluster	256
Tire pressure	512

Example: Tire pressure control

Instrument cluster + tire pressure =256 + 512 = 768

Change adaptation value via direct input. See B - Change adaptation value via direct input: .
Enter 5-digit adaptation value. Insert zeros in front.

Example:

Desired input value: 768 with tire pressure control

Keypad input: 00768

Display on VAS 5051 after performed adaptation:

Fig 3: Display On VAS 5051 - Adaptation Channel 61, Adaptation For Comfort System CAN-Bus (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Channel 61
1. Value 768 stored

End function "10 - Adaptation" by pressing <= button.