Adaptation channel 42 - minimum mileage performance

This function is used to specify a fixed minimum mileage performance in the instrument cluster for the SRI.

Display on VAS 5051:

Fig 1: Display On VAS 5051 - Adaptation Channel 42, Minimum Mileage Performance (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Select function "42" in button field -2- for "Adaptation channel 42" and press Q button to confirm input.

Display on VAS 5051:

Fig 2: Display On VAS 5051 - Adaptation Channel 42, Minimum Mileage Performance (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Channel 42
read and test
Minimum value Oil in 1000 Miles
Keypad - only direct input via the keypad is possible
The sliding bar is positioned on the current adaptation value, e.g. 10
The minimum mileage performance up to a service will be displayed (here for example 10 represents 10000 miles).

NOTE:

The currently valid specifications can be found in the "Maintenance" book.
See MAINTENANCE .
Input of current specified value is only possible in units of 1000 miles, therefore indication in display also changes in 1000 mile units.

Change adaptation value via direct input. See B - Change adaptation value via direct input: .
Enter 5-digit adaptation value. Insert zeros in front.

Example:

Specification: 10000 miles

Keypad input: 00010

NOTE: The "Save" button does not appear if an incorrect value was entered!

Display on VAS 5051 after performed adaptation:

Fig 3: Display On VAS 5051 - Adaptation Channel 42, Minimum Mileage Performance (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Value 10 stored