Adaptation channel 02-Resetting SRI after service

NOTE:

The Service Reminder Indicator (SRI) is used to remind the driver when a service is necessary. Indication is in center display.
Service reminder appears 1 month or 1200 miles before service limit is reached. Example for display: After a total driving distance of 7000 miles, "SERVICE IN 1000 miles" is indicated.
When a service event arrives, the text information appears in the center display for 5 seconds when ignition is switched on. It is shown after the note for automatic transmission and a target input for navigation (if applicable). Display: "SERVICE!".
The currently valid specifications can be found in the "Maintenance" book.
See MAINTENANCE .
Data version of instrument cluster. See Figure .
Channels 40, 41 and 45 are automatically set to "0".

Display on VAS 5051:

Fig 1: VAS 5051 Tester Display - Adaptation Channel 02, Resetting SRI After Service (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Select function "02" in button field -2- for "Adaptation channel 02" and press Q button to confirm input.

Display on VAS 5051:

Fig 2: VAS 5051 Tester Display - Adaptation Channel 02, Resetting SRI After Service (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

1 - Channel 2 read and test
2 - No indication
5 - Sliding bar is positioned on "1" Service is active, i.e. "SERVICE!" is displayed in the instrument cluster.

The service event is reset using the following adaptation value:

ADAPTATION VALUE

Adaptation value	Service event
00000	Reset

Change adaptation value using the sliding bar. See A - Changing adaptation value using sliding bar: .

Change adaptation value via direct input. See B - Change adaptation value via direct input: .
Enter adaptation value "00000".

Display on VAS 5051 after performed adaptation:

Fig 3: VAS 5051 Tester Display - Adaptation Channel 02, Resetting SRI After Service (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

NOTE: 0 means service has been reset, i.e. "SERVICE IN 1000 MI" is displayed in instrument cluster after call-up.