Exhaust manifold, removing and installing: Installing
NOTE:
- Replace self-locking nuts.
- Replace gaskets.
- Install in reverse sequence.
Tightening torques
TIGHTENING TORQUES: EXHAUST MANIFOLD
| Bolted mountings | Tightening torques |
| Exhaust pipe between exhaust manifold and turbocharger | 25 Nm |
| Exhaust pipe with catalytic converter to turbocharger | 25 Nm |
| Exhaust manifold to cylinder head | 25 Nm |
| Exhaust pipe to transmission | 25 Nm |
| Catalytic converter to front muffler | 25 Nm |
| Heat shield to turbocharger | 10 Nm |