LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2002 >> allroad Standard >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Lights, Switches-Exterior - 2001 And Up >> Lock cylinder and Ignition/starter switch >> Ignition/starter switch, removing and installing >> Installing

Ignition/starter switch, removing and installing: Installing

Installation is reverse of removal, noting the following:

NOTE: Make sure ignition/starter switch and lock cylinder are both in the same position, for example "ignition on" when installing.
scientia non olet · About LEMON Manuals