Control Modules for High Intensity Gas Discharge Lamps -J343-/-J344-, removing and installing: Removing
- Remove both bolts -1- at air intake channel and then pull up at rear part of intake channel -2- (only for right headlight).
Courtesy of AUDI OF AMERICA, INC.
- Remove housing cover from headlight housing.
- Disconnect connector -1- at HID headlight by turning counterclockwise.
Courtesy of AUDI OF AMERICA, INC.
- Remove guide -1- in housing cover by pressing locking lugs (arrow).
Courtesy of AUDI OF AMERICA, INC.
- Harness connector of HID headlights can then be guided through the cover.
- Disconnect connector -1-.
- Remove retaining plate -2- by loosening screw (arrow).
Courtesy of AUDI OF AMERICA, INC.
- Remove control module from headlight housing.