Adaptation (function 10), initiating

Indicated on display:

Fig 1: VAG1551 Scan Tool Display - Adaptation, Initiating - Telematics (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display:

Fig 2: VAG1551 Scan Tool Display - Adaptation, Initiating - Telematics (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display:

Fig 3: VAG1551 Scan Tool Display - Adaptation, Initiating - Telematics (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

NOTE:

Some OBD program text/data generated by control modules may not be recognized by VAG 1551/1552 scan tools with the latest program card. For example: scan tool display shows "text 799", "01529 /references" or similar. In these cases, use VAS 5051 tester instead.
After changing an adaptation value or ending an adaptation channel the function "10-Adaptation" must be performed to select another adaptation channel!