Output DTM, initiating
- Press buttons -0- and -3- to select "Output Diagnostic Test Mode" function 03.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
All loudspeakers will receive a brief electrical pulse (barely audible).
NOTE:
Any malfunctions (e.g. short circuits) that occur will be recorded in DTC memory.
Through m.y. 2001
- Press --> button.
Indicated on display
"DISPLAY ... TEST" will appear on the secondary display in instrument cluster.
- Press --> button.
From m.y. 2002
Indicated on display
All pixels in radio display light up.
- Press --> button.
Indicated on display
A 4 X 4 pixel relief in the middle of the radio display fades into "Diagnose".
NOTE:
A malfunctioning radio display (faulty segments) will not load a DTC.
- Press --> button.
All vehicles
Indicated on display
- Press --> button (returns scan tool to "Select function XX" prompt).
Indicated on display