Instrument cluster On Board Diagnostic (OBD), initiating: Procedure

Display on VAS 5051:

Fig 1: VAS 5051 Tester Display - Initiating Instrument Cluster OBD (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press selection -1- of vehicle system "17 - instrument cluster" (instrument panel insert).
Wait until the next indication appears on display.

Display on VAS 5051:

Fig 2: VAS 5051 Tester Display - Initiating Instrument Cluster OBD (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Fig 3: Control Module Identification, Instrument Cluster

Courtesy of AUDI OF AMERICA, INC.

NOTE: In the previous graphic, for Instrument Cluster Coding, see Code Control Module (function 07) .

Fig 4: Control Module Identification, Immobilizer Chart

Courtesy of AUDI OF AMERICA, INC.

Display on VAS 5051:

Fig 5: VAS 5051 Tester Display - Initiating Instrument Cluster OBD (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

1 - Selection of diagnostic functions:

DIAGNOSTIC FUNCTIONS - INSTRUMENT CLUSTER

Diagnostic functions	Comment
02 Check DTC Memory	See CHECK DTC MEMORY (FUNCTION 02) .
03 Output Diagnostic Test Mode (DTM)	See OUTPUT DIAGNOSTIC TEST MODE (DTM) (FUNCTION 03) .
04 Basic Setting	-
05 Erase DTC Memory	See ERASE DTC MEMORY (FUNCTION 05) .
06 End Output	See END OUTPUT (FUNCTION 06) .
07 Code Control Module	See CODE CONTROL MODULE (FUNCTION 07) .
08 Read Measuring Value Block	See READ MEASURING VALUE BLOCK (FUNCTION 08) .
09 Read Individual Measuring Value	-
10 Adaptation	See ADAPTATION (FUNCTION 10) .
11 Login Procedure	-
Enter vehicle identification number	-