Adaptation channel 62-Adaptation for information data-BUS: Notes

Display on VAS 5051:

Fig 1: Display On VAS 5051 - Adaptation Channel 62, Adaptation For Information Data-BUS (1 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Select function "62" in button field -2- for "Adaptation channel 62" and press Q button to confirm input.

Display on VAS 5051:

Fig 2: Display On VAS 5051 - Adaptation Channel 62, Adaptation For Information Data-BUS (2 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Channel 62
read and test

No indication
Keypad - only direct input via the keypad is possible
The sliding bar is positioned on the current adaptation value

NOTE:

The adaptation values of the table must be entered. See M.Y. 2001 or From M.Y. 2002 .
When replacing instrument cluster, observe. See Input values for replacing instrument cluster .

Installed control modules (addition of corresponding adaptation values) that participate in the A6 Comfort system CAN-bus are added (See measuring value block. See Measuring value block 140 ).