Automatic vertical headlight aim control On Board Diagnostic (OBD), initiating: Procedure

Display on VAS 5051:

Fig 1: Display On VAS 5051 - Automatic Vertical Headlight Aim Control On Board Diagnostic (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press vehicle system "55 automatic vertical headlight aim control" in selection -1-.
Wait until the next indication appears on display.

Display on VAS 5051:

Fig 2: Display On VAS 5051 - Automatic Vertical Headlight Aim Control On Board Diagnostic (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Fig 3: Control Module Identification, Automatic Headlight Aim Control (Example)

Courtesy of AUDI OF AMERICA, INC.

NOTE: In the previous graphic refer to:

Display on VAS 5051:

Fig 4: Display On VAS 5051 - Automatic Vertical Headlight Aim Control On Board Diagnostic (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

DIAGNOSTIC FUNCTIONS - AUTOMATIC VERTICAL HEADLIGHT AIM CONTROL

Diagnostic functions
02 Check DTC Memory	See CHECK DTC MEMORY (FUNCTION 02) .
03 Output Diagnostic Test Mode (DTM)	See OUTPUT DIAGNOSTIC TEST MODE (DTM) (FUNCTION 03) .
04 Basic Setting	See BASIC SETTING (FUNCTION 04) .
05 Erase DTC Memory	See ERASE DTC MEMORY (FUNCTION 05) .
06 End Output	See END OUTPUT (FUNCTION 06) .
07 Code Control Module	See CODE CONTROL MODULE (FUNCTION 07) .
08 Read Measuring Value Block	See READ MEASURING VALUE BLOCK (FUNCTION 08) .
09 Read Individual Measuring Value	-
10 Adaptation	-
11 Login Procedure	-