Immobilizer On Board Diagnostic (OBD), initiating: Procedure

Display on VAS 5051:

Fig 1: Display On VAS 5051 - Immobilizer On Board Diagnostic, Initiating (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press selection -1- of vehicle system "17 - instrument cluster" (instrument panel insert).

NOTE: Because the immobilizer is integrated in the instrument cluster, the same address word must be used as for the instrument cluster.

Display on VAS 5051:

Fig 2: Display On VAS 5051 - Immobilizer On Board Diagnostic, Initiating (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Fig 3: Immobilizer Control Module Identification - Example

Courtesy of AUDI OF AMERICA, INC.

Display on VAS 5051:

Fig 4: Display On VAS 5051 - Immobilizer On Board Diagnostic, Initiating (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

DIAGNOSTIC FUNCTION - IMMOBILIZER

Diagnostic functions
02 Check DTC Memory	See CHECK DTC MEMORY (FUNCTION 02) .
03 Output Diagnostic Test Mode (DTM)	-
05 Erase DTC Memory	See ERASE DTC MEMORY (FUNCTION 05) .
06 End Output	See END OUTPUT (FUNCTION 06) .
07 Code Control Module	-
08 Read Measuring Value Block	See READ MEASURING VALUE BLOCK (FUNCTION 08) .
09 Read Individual Measuring Value	-
10 Adaptation	See ADAPTATION (FUNCTION 10) .
11 Login Procedure	See LOGIN PROCEDURE (FUNCTION 11) .
Enter vehicle identification number	See ADAPTATION AFTER REPLACING INSTRUMENT CLUSTER AND THE ENGINE CONTROL MODULE (ECM) .