Checking internal resistance
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Audi A6, 2003 Audi S6, 2003 Audi A6, 2002 Audi S6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
- Connect multimeter at valve for resistance measurement.
- Specified value: 22 to 30 ohms
If specified value is not obtained.
- Replace Evaporative Emission (EVAP) canister purge regulator valve -N80-.
If specified value is obtained: