Speaker connection, adapting

Indicated on display

Fig 1: VAG1551 Scan Tool Display - Speaker Connection, Adapting - Navigation System IV, From 2002 (1 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -4- to select adaptation channel 04.
NOTE: A false entry can be corrected by pressing button -C-.
Press -Q- button to confirm input.

Indicated on display (example only)

Fig 2: VAG1551 Scan Tool Display - Speaker Connection, Adapting - Navigation System IV, From 2002 (2 Of 7)

Courtesy of AUDI OF AMERICA, INC.

The selected channel and status/type of speaker connection is displayed in the upper line (0 = external radio, 1 = own speaker.) If a radio system is installed, front left speakers are used, otherwise a separate speaker (hands-free speaker) is installed.

Press --> button.

Indicated on display (example only)

Fig 3: VAG1551 Scan Tool Display - Speaker Connection, Adapting - Navigation System IV, From 2002 (3 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Enter new adaptation value (e.g. 00001), where 00000 = external radio and 00001 = separate speaker.
Press -Q- button to confirm input.

Indicated on display

Fig 4: VAG1551 Scan Tool Display - Speaker Connection, Adapting - Navigation System IV, From 2002 (4 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display

Fig 5: VAG1551 Scan Tool Display - Speaker Connection, Adapting - Navigation System IV, From 2002 (5 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display

Fig 6: VAG1551 Scan Tool Display - Speaker Connection, Adapting - Navigation System IV, From 2002 (6 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press --> button.

Indicated on display

Fig 7: VAG1551 Scan Tool Display - Speaker Connection, Adapting - Navigation System IV, From 2002 (7 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -6- to select "End Output", function 06.
Press --> button.