Dynamic route guidance (where applicable), adapting
The navigation control module must be adapted to activate/deactivate dynamic route guidance functions and from what channel the information is taken (radio with RDS - TMC and/or telephone where applicable)
Indicated on display
Fig 1: VAG1551 Scan Tool Display - Dynamic Route Guidance, Adapting - Navigation System IV, From 2002 (1 Of 7)
- Press buttons -0- and -6- to select adaptation channel 6.NOTE: A false entry can be corrected by pressing button -C-.
- Press -Q- button to confirm input.
Indicated on display (example only)
Fig 2: VAG1551 Scan Tool Display - Dynamic Route Guidance, Adapting - Navigation System IV, From 2002 (2 Of 7)
The selected channel and system configuration is displayed in the upper line.
System configuration, interpreting:
0 = without dynamic route guidance
1 = with dynamic route guidance and RDS-Radio with TMC
2 = with dynamic route guidance and RDS-Radio with TMC and Telephone
- Press --> button.
Indicated on display (example only)
Fig 3: VAG1551 Scan Tool Display - Dynamic Route Guidance, Adapting - Navigation System IV, From 2002 (3 Of 7)
- Enter new adaptation value (e.g. 00001), where 00001 = with dynamic route guidance and RDS-Radio with TMC.
- Press -Q- button to confirm input.
Indicated on display
Fig 4: VAG1551 Scan Tool Display - Dynamic Route Guidance, Adapting - Navigation System IV, From 2002 (4 Of 7)
- Press -Q- button to confirm input.
Indicated on display
Fig 5: VAG1551 Scan Tool Display - Dynamic Route Guidance, Adapting - Navigation System IV, From 2002 (5 Of 7)
- Press -Q- button to confirm input.
Indicated on display
Fig 6: VAG1551 Scan Tool Display - Dynamic Route Guidance, Adapting - Navigation System IV, From 2002 (6 Of 7)
- Press --> button.
Indicated on display
Fig 7: VAG1551 Scan Tool Display - Dynamic Route Guidance, Adapting - Navigation System IV, From 2002 (7 Of 7)
- Press buttons -0- and -6- to select "End Output", function 06.
- Press --> button.