Adaptation, initiating

Indicated on display

Fig 1: VAG1551 Scan Tool Display - Adaptation, Initiating - Navigation System IV, From 2002 (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -0- to select "Adaptation", function 10.

Indicated on display:

Fig 2: VAG1551 Scan Tool Display - Adaptation, Initiating - Navigation System IV, From 2002 (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: VAG1551 Scan Tool Display - Adaptation, Initiating - Navigation System IV, From 2002 (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Enter desired adaptation channel (Adaptation table. See ADAPTATION TABLE: .)
Press -Q- button to confirm input.

NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.