LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2002 >> S8 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lights, Switches-Exterior >> Lock cylinder and ignition/starter switch, servicing >> Ignition/starter switch, removing and installing >> Installing

Ignition/starter switch, removing and installing: Installing

NOTE:
  • Ignition/starter switch and lock cylinder must both be in the "ignition on" position when installing.
  • Tighten both retaining screws on the steering lock housing and seal with paint.
  • Install in reverse order of removal.
scientia non olet · About LEMON Manuals