Select functions

The setting-up communication has been set up. You have checked the control module version and pressed the button.

Display: (Select function, for example, 02 - Check DTC Memory)

Fig 1: VAG 1551 Scan Tool - Select XX Function

Courtesy of AUDI OF AMERICA, INC.

You can now select one of the functions in this menu. Start troubleshooting using Function 02, "Check DTC Memory"

1. 01- Check Control Module Versions
2. 02- Check DTC Memory
3. 03- Output Diagnostic Test Mode
4. 04- Basic Setting
5. 05- Erase DTC Memory
6. 06- End Output
7. 07- Code Control Module
8. 08- Read Measuring Value Block
9. 10- Adaptation
10. 11- Login-Procedure

How to perform the functions "Erase DTC memory" and End output". See DTC TABLE, FOUR-WHEEL SELF LEVELING SUSPENSION SYSTEM  .

Read the relevant topic sections in this repair manual to find out how to use the other functions.

Press the --> button if a function has been entirely completed and you want to restore the troubleshooting function to the "Select function" starting point.