LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2002 >> S6 4.2 U >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust System - 4.2L V8 - Art, Awn, BBD >> Exhaust system components >> Exhaust manifold, removing and installing >> Installing >> Notes

Exhaust manifold, removing and installing: Installing: Notes

WARNING:
  • DO NOT re-use fasteners that are worn or deformed in normal use.
  • Some fasteners are designed to be used only once and are unreliable and may fail the second time. This includes, but is not limited to nuts, bolts, washers, circlips and cotter pins. Always follow the recommendations in this manual - replace these fasteners with new parts where indicated and any other time when deemed necessary by inspection.
NOTE:
  • Replace self-locking nuts.
  • Replace gaskets.
  • Install new sealing ring on guide tube for dipstick.
scientia non olet · About LEMON Manuals