General information: Function

Immobilizer III consists of:

• an adapted control module for anti-theft immobilizer (integrated in instrument cluster)
• a warning light in instrument cluster
• an induction coil at ignition lock
• an adapted Engine Control Module (ECM)
• and adapted ignition keys with electronics (transponder).

The anti-theft immobilizer is a system for enabling/locking the Engine Control Module (ECM) via the CAN wire.

The transponder code consists of a fixed code and a variable code. This is different for every start procedure and therefore acts as a copy protection for the transponder.

Every immobilizer contains a different computational rule for the variable code that remains the same for its entire service life. During adaptation of the vehicle key, the immobilizer writes this computational rule into the transponder and simultaneously learns the fixed code of the current key.

The fixed code identifies each individual key so that a key that is lost can be blocked from usage. Each time the ignition is switched on, the induction coil for immobilizer reads the transponder's fixed code and then the variable code and determines whether this key is authorized for vehicle start.

The warning lamp lights up briefly (max. 3 seconds) and then goes out when an authorized vehicle key is used.

When an unauthorized vehicle key is used or when a system malfunction occurs, the warning lamp blinks constantly during ignition "on".